Echelon OpenLDV User Manual download pdf (Page 93)

OpenLDV Programmer’s Guide 85

Network Interface

Command Value Direction Description

niSERVICE 0xE6 Downlink Requests that the network interface

send a service pin message. This

command has the same effect as

activating the device’s service pin.

Some network interfaces might not

support this command.

niXDRVESC

0xEF Uplink

Downlink

This command applies to xDriver

network interfaces only.

This message must contain a data

payload in addition to the command

and length bytes. The first byte of

the data field denotes an xDriver-

specific command; see Table 34.

For information about other

immediate commands that are

specific to a particular network

interface, see the documentation for

that network interface. For

example, the Power Line SLTA

Adapter and Power Line PSG/3

User’s Guide contains descriptions

of commands specific to the

SLTA/PSG interface products that

can be used to control dial-up

connections through a modem.

Table 34 on page 86 describes the xDriver-specific commands that you can use

with the niXDRVESC immediate command. The niXDRVESC immediate

command is described in Table 33 above.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 193 194

No comments

Echelon OpenLDV User Manual Page 93